Synthetic Membranes

Product Details:

PLANTER standard is a dimpled membrane produced by extrusion method on a base of high-density polyethylene (HDPE). The material is very lightweight and easy to install, herein it is featured by highstrength properties. PLANTER is resistant to chemicals, mould and bacteria,roots of plants and ultraviolet radiation. The top surface of the material iscovered with conic studs of 8 mm in height and 10 mm in diameter.

Additional Information:

• Delivery Time: 24 - 72 Hours
• Packaging Details: Rolls of PLANTER are delivered on pallets. Rolls should be stored indoors in a dry place in their original packaging and taken to the construction site ready to use. Keep a minimum distance of 1 m from any source of heat. Shelf life if all storage requirements are met: 12 months from the date of production.

Product Details:

Planter geo is a dual-layer dimpled HDPE membrane with 8 mm studs and a thermally bonded geotextile layer. It is ideal for vertical and horizontal drainage, as well as protective and separating layers for ballasted and green roofs. Lightweight, durable, and easy to install, it resists chemicals, mould, roots, and UV radiation. 

Additional Information:

• Delivery Time: 24 - 72 Hours
• Packaging Details: Rolls of PLANTER are delivered on pallets. Rolls should be stored indoors in a dry place in their original packaging and taken to the construction site ready to use. Keep the minimum distance of 1 m from any source of heat. Shelf life if all storage requirements are met: 12 months from the date of production.

Product Details:

LOGICROOF V-RP FB is a polyester reinforced PVC membrane with laminated geotextile fleece on the bottom surface, which is designed for use in fully adhered systems. The material is used for single-ply waterproofing of exposed flat roofs.

The multi-layer synthetic membrane is produced by co-extrusion on a base of

premium quality plasticized polyvinyl chloride (PVC-P). The top layer is

featured by a very high resistance to weather factors and UV rays, while the bottom layer offers a high resistance to puncture. A variation with a non-slippery textured surface of top layer LOGICROOF VRP FB (T) is available.

Additional Information:

• Delivery Time: 72 Hours
• Packaging Details: Rolls of synthetic membranes are delivered on pallets. Every roll is packed in the additional individual pack. Rolls should be stored lying down on pallets fully protected from moisture with clean canvas tarpaulins. Keep the minimum distance of 1 m from any source of heat. Shelf life if all storage requirements are met: 18 months from the date of production.

Product Details:

A synthetic waterproofing membrane with a UV-resistant TPO/FPA blend and fiberglass reinforcement for stability. Available in BIANCO REFLECTA with enhanced reflectivity (SRI up to 102%) and fire-resistant versions (Sintofoil RG/FR1 to RG/FR4).

Additional Information:

• Delivery Time: 72 hrs.
• Packaging Details: Membrane

Product Details:

ULTRABASE PA is a high-performance pre-applied HDPE membrane designed for waterproofing of foundations, tunnels and other engineering structures. The material represents composite sheets of thick HDPE film with a special adhesive compound that reacts with a wet mortar and gives an excellent integral bonding. The waterproofing membrane bonds directly to the concrete, thus sealing it and preventing any ingress of water around the structure, even in cases of soil sedimentation. ULTRABASE PA membrane does not require protection before backfilling.

Additional Information:

• Delivery Time: 24 - 72 Hours
• Packaging Details: Rolls of the material should be stored indoors in a dry place in their original packaging and taken to the construction site ready to use. Rolls should be stored upright on pallets in a 1-row height. Falls or other mechanical impacts should be avoided during transportation and storage. Roll’s packaging should not be damaged. Shelf life in indicated conditions – 12 months.

Product Details:

ULTRABASE PA (Sand finish) is a high-performance pre-applied HDPE membrane designed for waterproofing of foundations, tunnels, and other engineering structures. The material represents composite sheets of thick HDPE film with a special pressure sensitive adhesive compound protected with sand that reacts with a wet mortar and gives an excellent integral bonding. The waterproofing membrane bonds directly to the concrete, thus sealing it and preventing any ingress of water around the structure, even in cases of soil sedimentation. ULTRABASE PA membrane does not require protection before backfilling.

Additional Information:

• Delivery Time: 24 - 72 Hours
• Packaging Details: Rolls of the material should be stored indoors in a dry place in their original packaging and taken to the construction site ready to use. Rolls should be stored upright on pallets at a 1-row height. Falls or other mechanical impacts should be avoided during transportation and storage. Roll’s packaging should not be damaged. Shelf life in indicated conditions minimum – 12 months.

Product Details:

PLANTER eco is a lightweight, durable HDPE profiled membrane with 8 mm conic studs. It protects waterproofing layers from mechanical damage, roots, mould, chemicals, and moisture while serving as a preparation layer for foundation slabs and aiding in damp wall sanitation. Resistant to UV, chemicals, and bacteria, it is easy to install horizontally or vertically, with optional sheet welding on flat edges.

Additional Information:

• Delivery Time: 24 - 72 Hours
• Packaging Details: Rolls of PLANTER are delivered on pallets. Rolls should be stored indoors in a dry place in their original packaging and taken to the construction site ready to use. Keep a minimum distance of 1 m from any source of heat. Shelf life if all storage requirements are met: 12 months from the date of production.